Advertisement
Main wheels and brakes
Fit the aluminium hub on the tire
Check that 3 holes are in front of the rubber
Drill the 3 x 3 mm holes in the rubber for
the screws
Fit and glue the bearing in the aluminium
hub.
Assemble the wheels and tires with the 9
screws.
Do not overtight them. Stop to screw them
when the 2 hubs touched together
Don't forget to secure the screws with
threadlock before to fly ......
Screw the air nipple to the brake drum
Put some silicon glue in the brake drums
and on the special ring.
Insert the ring in the drum.
24
Advertisement
