FINISHING TIPS :
Now you have to remove the wax from all the parts to paint.
Please use the white liquid product supplied with your model.
Apply the white liquid with a rag to wipe the wax from all the composite parts.
Remove all product and clean the parts with water after.
Before painting and for a best paint adhesion, we also recommand to sand all the surfaces with a "scotch
brit" scouring pad used to wash up the crockery or with #800 grit paper.
PAINT :
Do not apply primer on the fuselage, wings and fin.
They must be directly painted.
Think light : excessive paint build-up will add unnecessary weight to the model. Apply light, thin coats of
paint and sand between coats to avoid excess weight.
Batteries
Batteries can be located in the central position or in the front section according to the CG.
64