Kit Features - Aviation Design SUKHOI SU-27 Assembly Manual

INTRODUCTION
The Su-27 from AVIATION DESIGN is designed for high thrust jet engines.
It is a scale kit, with all the panel lines engraved in the fuselage and a lot of scale details (gears, hinges,
cockpit...). It is fully molded in fiberglass, carbon and epoxy. Up to 80% of the work is done in our
factory.
The flight characteristics are excellent with low and high speed capability.
The model has plug in wings, stabs and fins.
The Sukhoi will operate from prepared grass fields (70 meters long) or tarmac surfaces.

KIT FEATURES

- High quality, grey gel-coated epoxy-glass fuselage. All the panel lines are engraved. The fuselage is in 2
parts for shipping.
- Nose cone and central tail boom in epoxy glass
- Air brake molded in epoxy-glass
- Main gear doors
- Canopy frame molded in epoxy-glass
- 2 Exhaust nozzle.
- 2 Epoxy-glass inlets
- 2 Epoxy-glass ductings
- Fully molded epoxy carbon wings and stabs
with aluminium spar already glued.
- Fully molded epoxy carbon fins with
aluminium spar already glued
- 2 ventral fin in epoxy
- Wing tip rails
- All plywood and wood parts pre-cut to shape
where necessary.
- Air cylinder for air brake.
- All hardware necessary.
Following items are included in the kit
For the fuselage :
a set of screws + blind nuts for the gear
For the canopy, 1hatch latch
For the air brake, 1air cylinder + tubing and air valve
For the stabs :
4 ball bearing for the stabs
4 ball bearing mounting
8 screws M3x16 mm long
2 aluminium link M4
2 threaded rod M4
2 carbon control horns
- ABS cockpit interior and scale accessories.
- Clear formed canopy.
- Cockpit detail kit include 1/8 full body jet pilot, 1/8 ejector seat & instrument panel.
- pitot probes and incidence probes.
- vacuum parts
- instructions in English and plan.
AVIATION DESIGN - ZI le Chenet - 91490 MILLY LA FORET – FRANCE - Tel : int+ 33 1 64 98 93 93 - aviation.design@wanadoo.fr – www.adjets.com
2