Speed Controller Adjustment - DoorKing 9500 Series Owner's Manual

3.6 Speed Controller Adjustment

Select 9500 models are equipped with a speed control module that allows you to adjust the speed of the gate from 0 to 2 ft/ sec
or 0 to 4 ft/sec on the high speed models. To adjust the speed, simply rotate the speed control knob clockwise to increase the
gate speed, or counter-clockwise to decrease the gate speed. The digital readout on the speed controller will display the gate
speed.
9500 with Single Phase Motor
Speed Control Knob
0 to 2 ft/sec
1 ft/s
.5 ft/s 1.5 ft/s
0 ft/s 2 ft/s
Min Max
Speed
Speed Brake On Select Models
The 10:1 gear reducer 9500 models are equipped with a speed brake. It is automatically controlled by the speed controller and
needs NO adjustment. There is a manual release lock on the speed brake that must be unlocked before the gate can be manually
operated (See section 4.3 manual release on page 29 for further information).
NO adjustment is needed for the speed brake.
26
L1 L2/N B- B+
PE
1.0
EPM
Speed
Controller
Mode
SCM series
basic I/O control
U V W PE PE
Speed Brake
9500 Models with 3 Phase Motor
Speed Control Knob
0 to 4 ft/sec
2 ft/s
1 ft/s 3 ft/s
0 ft/s 4 ft/s
Mode
Min Max
Speed
Speed Control Knob
0 to 2 ft/sec
1 ft/s
.5 ft/s 1.5 ft/s
0 ft/s 2 ft/s
Manual Release
L1 L2 L3 B- B+
3.6
EPM
Speed
Controller
SCM series
basic I/O control
U V W PE PE
Draft - Not for Release - 9510-065-D-3-10