Advertisement
4 Installation
► Disconnect power before installation.
► Remove protective cap for M12 socket when the plug is connected (→
Step 3).
Step 1: Install lower part
Step 2: Insert cable
AS-i
► Choose a plane mounting surface.
► Fix the lower part to the mounting
surface at the mounting holes (1).
► Insert the yellow AS-i flat cable (2)
into the cable duct "AS-i".
► Insert the black 24 V flat cable (3)
into the other cable duct.
If no additional power supply is
required:
► Instead of the 24 V flat cable
insert the supplied cable
dummy to close the unused
cable duct.
UK
3
Advertisement
