Advertisement
3 Functions and features
The encoder converts rotary movements into digital numerical vales Each
revolution and each angular position of the revolutions is provided as a numerical
value
These values allow angular movements to be measured and positions and
number of revolutions to be determined
• Supply voltage and resolution according to the type label
4 Installation
► Disconnect power The drive must not be started during installation
► Do not hit the shaft; do not use a file or similar tool on the shaft Risk of
destruction!
Attention: This product corresponds to the standard EN 61000-6-4 The unit may
cause radio interference in domestic areas Where applicable, the user has to take
appropriate measures to avoid these
4.1 Installation solid shaft encoder (synchro flange)
1: angle bracket
2: fastening clamp (3 pieces) E60041
4
Advertisement
