EDAN Sonotrax Pro User Manual page 69

SONOTRAX(2009) Series Ultrasonic Pocket Doppler User Manual
of dust and dirt.
Clean the exterior surface of the main unit with a dry,
soft cloth. If necessary, clean it using a soft cloth
dampened with mild near neutral detergent, ethanol
(75%) or isopropanol (70%), and then wipe it dry
with a dry cloth immediately.
Wipe the remaining coupling gel off the probe. Clean
it using a soft cloth dampened with mild near neutral
detergent, ethanol (75%) or isopropanol (70%), and
then air-dry it or wipe it dry with a dry cloth.
1 Do not use strong solvent, such as acetone.
2 Never use an abrasive such as steel wool or
metal polish.
3 The main unit is not waterproof. Do not
immerse any part of it into liquid.
4 Avoid pouring liquids on the main unit while
cleaning.
5 Do not remain any solution on the surface
after cleaning.
6 Only the body and cable of the probe are
waterproof. Do not immerse the probe
socket into any liquid.
CAUTION
61