Testing A Bluetoad Spectra Rsu After Field Installation - TraffiCast BlueTOAD Spectra Quick Start Manual

BlueTOAD Spectra RSU Deployment

Testing a BlueTOAD Spectra RSU After Field Installation

1. Plug the Ethernet cable into the PoE Injector to power ON the Spectra RSU.
2. Confirm that all LEDs are normal after the unit initializes:
3. Before leaving the location:
a. After the unit is Powered ON, call TrafficCast Customer Support at (608) 713-9299.
i. Tell TrafficCast the device ID number and that the LEDs are normal.
ii. Confirm from TrafficCast that the network is transmitting the SPaT and MAP data from
this unit.
b. Access TrafficCast RSU status using the web-based BlueARGUS software.
i. Login credentials (Username and Password) are provided to each User, based on their
predetermined Role (Admin, Tech1 or Tech2) when the Account is initially setup.
ii. BlueARGUS Website:
4. Add each installed TrafficCast RSU unit to a compiled list of unit location data. For each unit, keep
a record of device ID, location, and installation date.
TrafficCast Support Website:
3-22
https://bluetoad.trafficcast.com/
https://trafficcast.zendesk.com
TrafficCast Quick Start—BlueTOAD Spectra and Spectra RSU
Revision 02 May 2019