TraffiCast BlueTOAD Spectra Quick Start Manual page 51

iii. Pass the cable through the Liquid-Tight Cable Gland of the Ethernet cable Coupler and
terminate it to an RJ45 connector per the pinout shown.
TrafficCast Quick Start—BlueTOAD Spectra and Spectra RSU
Revision 02 May 2019
Note: You will have to remove the Strain Relief on the cable to pass it through the
Cable Gland. However, you can slide the Strain Relief away from the RJ-45
connector without cutting the Strain Relief.
BlueTOAD Spectra RSU Deployment
3-19