TraffiCast BlueTOAD Spectra Quick Start Manual page 13

d. To change any of the fields in the System Settings area:
i. Enter the new value into each field.
ii. When done, click Submit Changes.
iii. The BlueTOAD Spectra resets automatically.
TrafficCast Quick Start—BlueTOAD Spectra and Spectra RSU
Revision 02 May 2019
Note: For a helpful workbook to keep a record of the values in each field, go to
https://trafficcast.zendesk.com/hc/en-us/articles/360015177732-Preprogramming-
installation-cheat-sheet
In the middle left of the page, select BlueTOAD Programming Cheat Sheet.xlsx
At the bottom left of the Excel page, select the Pre Installation Sheet tab.
Important: If you change the IP address,
Spectra IP address because you must use the new IP address to log back into this
same device! Without the correct IP, you CANNOT log in.
BlueTOAD Spectra Deployment
keep a record of the new BlueTOAD
2-3