Placing Of The Liquids - Arjohuntleigh Century Assembly And Installation Instructions Manual

3 Carefully clean the surfaces where
the rim is to be mounted. Use a non
flocking rug. Let dry. (See Fig. 5)
4 Remove the protective foil on the
shorter pieces. Make sure the rear
edge of the rim is following the
contour of the wall. (See Fig. 6)
NOTE!
Avoid stretching the rim during
monting.
4 Procede with the longer piece.
Remove the foil continuously as the
rim is mounted. Put the rear edge of
the rim close against the wall, fol-
lowing its contour. (See Fig. 7)
5 Ensure the rear end of the rim
is placed close against the wall.
(See Fig. 8)

Placing of the liquids

1 Place ArjoClean (Arjo Cen-Kleen IV
in the US and Canada) bottle in its
place behind the door at the left side
of the bathtub. Place ArjoOil (Arjo
Cen-Sol II in the US and Canada)
(alt. ArjoSound) and the ArjoCare
(Arjo Cen-Care II in the US and
Canada) bottles in their place behind
the door at the right side of the
bathtub. Connect the suction units to
them. (See Fig. 9)
A - ArjoClean (Arjo Cen-Kleen IV):
Arjo Disinfectant Cleanser.
B - ArjoOil (Arjo Cen-Sol II):
Arjo Skin Conditioner & Bath Oil
(alt. ArjoSound).
C - ArjoCare (Arjo Cen-Care II):
Arjo Shampoo & Body Wash
2 Set the Disinfectant/Cleaner
concentration. (See Fig. 10)
See instructions in a separate
document, the Operating and
Product Care Instructions.
12
5
7
9
10
6
8
9
A
C
B