Hyundai Palisade 2020 Owner's Manual page 71

Hide thumbs Also See for Palisade 2020:
Table of Contents

Advertisement

Safety system of your vehicle
To install a child restraint system on
the rear seats, do the following:
1. Place the child restraint system on
a rear seat and route the lap/ shoul-
der belt around or through the child
restraint, following the restraint
manufacturer's instructions.
Be sure the seat belt webbing is not
twisted.
NOTICE
When using the rear center seat
belt, you should also refer to the
"Rear Seat Belt – Passenger's 3-
point system" section in this
chapter.
2-54
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis-
tinct "click" sound.
i
Information
Position the release button so that it is
easy to access in case of an emergency.
OLMB033045
3. Pull the shoulder portion of the seat
belt all the way out. When the
shoulder portion of the seat belt is
fully extended, it will shift the retrac-
tor to the "Automatic Locking" (child
restraint) mode.
OLMB033097

Advertisement

Table of Contents
loading

Table of Contents