Hyundai Palisade 2020 Owner's Manual page 496

Hide thumbs Also See for Palisade 2020:

Table of Contents

What to do in an emergency

9. Insert the jack handle into the jack

and turn it clockwise, raising the

vehicle until the tire clears the

ground. Make sure the vehicle is

stable on the jack.

10. Loosen the lug nuts with the

wheel lug nut wrench and

remove them with your fingers.

Remove the wheel from the

studs and lay it flat on the ground

out of the way. Remove any dirt

or debris from the studs, mount-

ing surfaces, and wheel.

11. Install the spare tire onto the

studs of the hub.

12. Tighten the lug nuts with your fin-

gers onto the studs with the

smaller end of the lug nuts clos-

est to the wheel.

13. Lower the vehicle to the ground

by turning the jack handle coun-

terclockwise.

14. Use the wheel lug nut wrench to

tighten the lug nuts in the order

shown. Double-check each lug

nut until they are tight. After

changing tires, have an author-

ized HYUNDAI dealer tighten the

lug nuts to their proper torque as

soon as possible. The wheel lug

nut should be tightened to

79~94 lbf·ft (11~13 kgf·m).

Chapters

Table of Contents