Hyundai Palisade 2020 Owner's Manual page 361

Driving your vehicle
Auto start
To restart the engine in the auto
stop mode
Release the brake pedal.
- When Auto Hold is activated, if you
release the brake pedal, the
engine will be in the auto stop
state. However, if you depress the
accelerator pedal, the engine will
start again.
The auto stop indicator (
OFF on the instrument cluster, when
the engine is restarted.
5-52
The engine is automatically restart-
ed in the following situations.
• The fans speed of the manual cli-
mate control system is set above
the 3rd position, with the air condi-
tion ON.
• The fan speed of the automatic cli-
mate control system is set above
the 6th position, with the air condi-
tion ON.
• A certain period of time has
) goes
elapsed with the air condition ON.
• The defroster is activated.
• The brake vacuum pressure is low.
• The battery is weak.
• The vehicle is shifted to P (Park) or
R (Reverse) when the brake pedal
is depressed or the Auto Hold is
activated.
• The door is opened or seat belt is
unfastened when the brake pedal
is depressed or Auto Hold is acti-
vated.
• The EPB is pressed when the Auto
Hold is activated.
The auto stop indicator (
in green for 5 seconds on the instru-
ment cluster.
The auto start is temporarily deac-
tivated in the following situations.
When the gear is shifted from N
(Neutral) to R (Reverse), D (Drive) or
Manual shift mode without the brake
pedal depressed. A message "Press
brake pedal for Auto Start" will
appear on the LCD display. To acti-
vate auto start, depress the brake
pedal.
) blinks
OIK057086N