Hyundai Palisade 2020 Owner's Manual page 593

Hide thumbs Also See for Palisade 2020:
Table of Contents

Advertisement

Recommended SAE viscosity
number
CAUTION
Always be sure to clean the area
around any filler plug, drain
plug, or dipstick before check-
ing or draining any lubricant.
This is especially important in
dusty or sandy areas and when
the vehicle is used on unpaved
roads. Cleaning the plug and
dipstick areas will prevent dirt
and grit from entering the
engine and other mechanisms
that could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold
weather operating (engine start and engine oil flowability). Lower viscosity
engine oils can provide better fuel economy and cold weather performance,
however, higher viscosity engine oils are required for satisfactory lubrication
in hot weather.
Using oils of any viscosity other than those recommended could result in
engine damage.
When choosing an oil, consider the range of temperature your vehicle will be
operated in before the next oil change. Proceed to select the recommended
oil viscosity from the chart.
Temperature Range for SAE Viscosity Numbers
-30
°C
Temperature
(°F)
-10
Engine
Oil *
1
*
1
: For better fuel economy, it is recommended to use the engine oil
of a viscosity grade SAE 5W-30. However, if the engine oil is not
available in your country, select the proper engine oil using the
engine oil viscosity chart.
-20
-10
0
10
20
0
20
40
60
10W-30
5W-30
30
40
50
80
100
120
8 8
8-9

Advertisement

Table of Contents
loading

Table of Contents