Known Issues - Avaya IP Office HP DL360G7 Technical Bulletin

9

Known Issues

The following is a list of issues and workarounds, if available, that exists in this
release of IP Office 8.1 software and where applicable will be addressed in a future
release of software.
Bug Ref Component
29126 Core
Features
29127 Core
Features
29191 Core
Platform
29190 Manager
29188 Manager
28675 Manager
28401 Manager
29480 Manager
28089 One-X
Portal
29198 Server
Edition
28963 Server
Edition
29259 Server
Edition
26661 Server
Edition
29235 Server
Edition
COMPAS ID 157236 Issue 2
Description of Issue
Call Listen audio is lost when
second call comes into
monitored extension and covers
to voicemail
Teleworker configuration causes
inconsistent results in certain
configuration
Locale for South Africa not
accurate at all
Server Edition Manager View
options keep reverting back to
default
8.1.39 Manager deletes id group
settings in the SCN network if
the network map is modified
Known Units discovery does not
work
Can't connect to an unsecure
IP500v2 using secure Manager
and connectivity to the unit is
intermittently lost
Manager eventually stops
responding when modifying
500+ ICR
Flare doesn't receive offline
messages from one-X Portal
Server Edition Primary reports
of failure to upgrade using Web
Control
NTP daemon needs restart
when time correction exceeds
the sanity limit(1000sec)
ntp.conf doesn't contain the
option 127.127.1.0 after fresh
install
The License Feature Key Grace
Period Expired alarm is not
cleared after putting back the
original feature key
Web Voicemail not working on
SE if VM Provider IP address
(127.0.0.1) is not set the same
as LAN1
IP Office Technical Bulletin number 145
Workaround (if available)
None
Do not configure own
extension as Teleworker
number
Manually configure settings
Manually reconfigure
settings
The user should not use the
Graphical Network view to
change the layout, and
make any changes if needed
from the configuration only.
None
Use unsecure option in
Manager.
When modifying the ICR
then the configuration
should be saved frequently
and Manager restarted to
avoid problem
None
Use Manager to complete
upgrades of IP500 V2
Expansions
None
If a change is made to NTP
options in Web Control, then
the option 127.127.1.0 is
added in ntp.conf
None
Set the one-X portal VMPro
Provider IP address to LAN1
IP address of the VMPro
server.
Page 51 of 59