1
(1)
4
7.3 Cable chains
In the case of tables with C-type feet [Figure 1-2], the Cube cable
chain (1) for metal cable trays is guided from below into the tray and
fixed from above with the guide rod (2). In the case of tables with T-type
feet [Figure 3], the Cube cable chain is fixed to the outside of the metal
cable tray using a magnet. To ensure well-controlled guidance, the chain
is fixed to the foot of the table using two built-in magnets.
In the metal cable tray [Figure 4], the round cable chain (3) is suspended
in the punched-out recess (4) by means of the universal retaining clip (5).
In the textile cable tray [Figure 5], the universal retaining clip (5) is placed
in position.
The textile cable hose is fixed directly to the metal cable tray using a
magnet and is fixed to the bracket in the case of textile cable trays.
2
(2)
(1)
(4)
3
(1)
(3)
5
(5)
(3)
55