Moving/Removing The Table Top - VS 910 Series Operating Instructions Manual

1
(2)
(4)
2
(2)
(4)
7. Table management

7.1 Moving/removing the table top

To move [Figures 1-2] the table top (1), briefly push the safety lever
on the bottom side to the left to release the first safety stop (2). Move
the table top to the second stop (3). In this position, the table tray is
accessible. To remove the table top, unlock it again and pull it over the
second safety mechanism.
Caution! When moving the table top, always keep the electrical
connection flap open.
To remove or insert [Figure 3], align the guides (4) on the bottom
side of the table top with the two table brackets (5). Push the inserted
top as far as the first stop and activate the safety handle. Unlock the
second safety stop to push the table top into its end position.
Caution! Clear all items from the table top before moving or
removing it.
3
(1)
(3)
(5)
(1)
(5)
(4)
(5)
(5)
53