Button Lock/Safety Mechanism In Private Premises - VS 910 Series Operating Instructions Manual

- Moving to saved positions
After the positions have been saved, it is easy to move to them by
pressing and holding down the handswitch. When a saved position
is reached, the table stops automatically.
In this way, the user can switch between standing and sitting without
having to look at the handswitch.
- When the table stops at a saved position, the user can press the
handswitch for one second and the table travels past the saved
position in the direction in which the handswitch was pressed.
Alternatively, the user can release the handswitch and then press it
again in order to travel past the saved position.
- Deleting saved positions
Press the star button for 8 seconds to delete all the saved positions.
The LED or the light strip flashes red when the operation is complete.

4.3 Button lock/safety mechanism in private premises

The handswitch (VS part no. 88-668) must be secured using a locking
function when the table is used in private premises. If this function is
not present, please contact the:
VS Customer Service (Tel. +49 (0)9341/880)!
Caution! If the handswitch is locked, a padlock lights up in the
display. The light turns red for one second.
To unlock this control element [Figure 1], press the buttons bell (1) -
1
(1) (2) (3)
Bluetooth (2) - star (3) directly after one another
(max. 1 second between presses). When the
handswitch is unlocked, the height is shown in
the display. The handswitch is now activated.
You can adjust the table as you wish by pressing
the handswitch.
45