Electrical System Of Focus - Webasto Thermo Top E Installation Documentation

Electrical system of Focus

Wiring harness pass through
1 Protective rubber plug detached
1
1
Fuse holder, K3 relay
When drilling, watch components located behind.
2 K3 relay, 4 mm dia. hole, 5.5x13 self-tapping
screw
3 Fuse holder, 4 mm dia. hole, 5.5x13 mm self-
tapping screw
1 Wiring harnesses routed to right and fastened
with cable ties
Ford Focus / Focus C-MAX / Focus CC
Digital timer
1 Digital timer
2 Summer/winter switch, drilled hole 12 mm dia.
2
2 3
4
Connection to battery
Route wires (1) to left and fasten with cable ties.
2 Earth wire on negative battery terminal
3 Positive wire on positive battery terminal
1
Do not install the metering pump
wiring harness until later togeth-
er with fuel line along the original
vehicle fuel lines on the under-
body
1
2
3
i
Diagram
of wiring
harness
routing for
Focus
2
3
5
7