Fuel - Webasto Thermo Top E Installation Documentation

Fuel

CAUTION!
Open the vehicle's fuel tank cap, ventilate the tank and then re-close the tank lock.
Collect any discharged fuel in an appropriate container.
Install fuel line and metering pump wiring harness so that they are protected against stone impact.
Unless specified otherwise, always fasten using cable ties.
Mount the fuel line and wiring harness with rub protection on sharp edges.
WARNING!
The fuel line and wiring harness of the metering pump are routed as shown in the wiring harness
routing diagram.
1
2
1 2
6
Ford Focus / Focus C-MAX / Focus CC
1 2
44
1
45
3 2
46
5
1 Mecanyl fuel line
2 10 mm dia. Caillau clamp
Route mecanyl fuel line to firewall and fasten
with cable ties as shown. Pay particular atten-
tion to sufficient distance from cardan shaft.
Installation location on right next to vehicle
fuel tank.
1 Angle bracket
2 M6x20 bolt, spring lockwasher on existing
threaded insert
1 Hose section
2 10 mm dia. Caillau clamp [2x]
4 180° moulded hose
3 Rubber-coated p-clamp
5 Silent block
6 Flanged nut
4
Connec-
tion to
heater
Installa-
tion loca-
tion of
metering
pump
Premount-
ing meter-
ing pump
23