Peripheral Expansion Board - Epson S5U13U11 User Manual

S1D13U11 Display Controller

7.1 Peripheral Expansion Board

If a peripheral expansion board is required for developement, assemble connector CN4 on the S5U13U11 evaluation
board. The mating connector to CN4 is PS-40PE-D4LT1-PN1 (Japan Aviation Electronics Industry, Limited).
Assemble the PS-40PE-D4LT1-PN1 connector with 2mm of clearance from the PCB edge to the mold edge.
Expansion Peripheral Board
S5U13U11
2mm
Figure 7-2: Peripheral Expansion Board Connection
S5U13U11 Evaluation Board User Manual (Rev. 1.1) EPSON 25