FALCOM MAMBO2-B6 Getting Started page 8

G S MAMBO2-B6 EVALKIT
ETTING TARTED WITH
USB-A to Mini-
USB cable
Docking station
Holding Cradle
Base plate
USB to Mini-USB
cable
Bike mounting kit
Handlebar clamps
(22-26mm & 27-
32mm)
Base Plate
Cardan bracket
Holding Cradle
Set screws & Hex
key
Car mounting kit
Vehicle suction
foot
Holding frame
USB-to-mini-USB
power cable
Car charger with
USB port
Base plate
Set screws
Allen key
Info-sheet
Table 1: MAMBO2-B6-EVAL-BOX contents.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
The USB-A to Mini-USB retractable cable with FALCOM logo is
used to connect the USB MAMBO2-B6 to your PC for charging the
1 internal battery and data transfer. It can also be used with the
supplied
USB Car Charger Adapter
to charge your MAMBO2-B6 anywhere. Length: 107 cm.
This item is an accessory for a MAMBO2-B6 device which provides
a simplified way of "plugging-in" and allows communication with a
PC via its USB port. The docking station remains on a desk and it is
not needed to carry away while travelling.
Holding cradle of the docking station that has to be attached to
1
the lower part after the USB cable has been fixed.
1 Base plate of the docking station.
To be inserted to the holding cradle before assembled it with the
1
base bracket.
Designed to easily mount directly to your bike handlebar, boat or
in the car with a variety of viewing position. It can be moved easily
from one bicycle to another.
Attach your handlebar clamps to the handlebar of your bike
handlebars from 22 mm - 26 mm and 27-32 mm. No other tools required
1
to attach or remove.
1 Used to connect the clamp to the cradle.
The Cardan bracket in this box attaches with a removable base to
any flat surfaces such as those found on the dashboard of your
1
car.
1 Holds your MAMBO2-B6 in place while riding.
Includes different types of screws that will be used to secure items
4+1
with each other.
Designed to easily mount directly to your car windscreen with a
variety of viewing position. It can be moved easily from one car to
another.
1 Used to mount the device on the
1 Holds your MAMBO2-B6 in place while driving.
1 For connecting the device to the car charger.
1 For connecting the device to the Car Cigarette Lighter
1 Already assembled on the Holding frame.
& Includes 4 screws and an Allen key for attaching the base plate to
4 + 1
the holding frame.
Provides information about your registration data on the FALCOM
1
server, PIN of the supplied SIM card and the phone number etc.
V
ERSION
or
USB Mains Charger Adapter
.
car windscreen.
Socket.
Page 8 of 24
1.0.3
Fits