Charging The Battery - FALCOM MAMBO2-B6 Getting Started

Evalkit
Hide thumbs Also See for MAMBO2-B6:
Table of Contents

Advertisement

G
S
MAMBO2-B6 EVALKIT
ETTING
TARTED WITH

2 - Charging the battery

Before using the MAMBO2-B6 device you will need to charge the internal battery even if
shipped from the factory pre-charged. Because it may has been some time in transit and storage before
reaching you,
it is recommended to charge the device while turned off for approx. 4-5 hours
first
use.
Thereafter, open the SIM card/Charger cover on the bottom of the device by pulling down the cover
with your fingernail. There are a mini-USB port and SIM Card interface.
1. Unpack the USB to Mini-USB retractable cable and plug one end of this cable with Mini-USU
connector into the 5V Mini-USB connector of the device.
2. Unpack the AC/DC Adapter USB from the box and plug the other end (A-type plug) of the USB
to Mini-USB retractable cable into the USB jack connector of the AC/DC Adapter USB and
finally plug this adapter into an EU socket outlet (to access a US or UK socket outlets, or car's
cigarette lighter use the corresponding US or UK adaptor, or USB car charger).
➢ The status LED on the right side of the display lights green when charging is started
and turns off when charging is completed,
➢ It is recommended to fully discharge the battery before recharging,
➢ Charging time varies according to the ambient temperature and the status of
battery.
Figure 2:
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Accessories for charging the internal battery
V
1.0.3
ERSION
it may be
before the
Page 11 of 24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAMBO2-B6 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents