Ergotron StyleView User Manual page 8
Telepresence kit for single lcd cart
Hide thumbs
Also See for StyleView:
- User's installation manual (40 pages) ,
- Manual (28 pages) ,
- User manual (23 pages)
Table of Contents
Advertisement
9
On Powered Carts only, reset drawer power so keypad will recognize added drawer.
NOTE: This step is not needed on Non-Powered Carts.
a
Turn off all mounted equipment.
d
Remove front base cover.
e
Unplug drawer power cable and
then plug it back in to reset.
f
Replace front base cover.
8 of 18
b
Disconnect Power System from power source.
c
Turn power system off by
holding down the AC Outlet
Power button for 1 - 3 seconds.
Power light will shut off .
888-97-333-G-00 rev. A • 09/13
Advertisement
Table of Contents
Need help?
Do you have a question about the StyleView and is the answer not in the manual?