Wlan Module - HP Chromebook PC Maintenance And Service Manual

WLAN module

Description
Intel Stone Peak 2 D1 7265 ac 2×2 + Bluetooth 4.2 M.2 non-vPro PCI-e WW with dual antenna
IMPORTANT:
and replacement.
Before removing the WLAN module, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the display panel (see
components:
▲ Battery (see
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2".
2. Remove the Phillips PM2.0×3.4 screw (2) that secures the WLAN module to the system board (the WLAN
module tilts up).
42 Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Display panel assembly on page
Battery on page
The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled "1".
24).
Spare part number
901229-855
20), and then remove the following