Wlan Antenna - HP Chromebook PC Maintenance And Service Manual

WLAN antenna

Description
WLAN dual antenna module
IMPORTANT:
and replacement.
Before removing the WLAN antenna module, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the display panel (see
components:
▲ Battery (see
Remove the WLAN antenna module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
2. Remove the four Phillips M2.0 × 3.0 screw (2) that secure the antennas to the base enclosure.
3. Remove the antennas from the base enclosure (3).
Reverse this procedure to install the WLAN antenna module.
Make special note of each screw and screw lock size and location during removal
Display panel assembly on page
Battery on page 24).
Spare part number
L17064-001
20), and then remove the following
Component replacement procedures 35