Table of Contents
Advertisement
Display panel cable
NOTE:
The display panel cable is not spared separately.
IMPORTANT:
and replacement.
Before removing the display panel cable, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the display panel assembly (see
Remove the display panel cable:
1.
Remove the adhesive cover from the display panel cable (1).
2.
Raise the retaining clip to release the display panel cable (2).
3.
Remove the display panel cable (3).
Reverse this procedure to install the display panel cable.
Make special note of each screw and screw lock size and location during removal
Display panel assembly on page
Component replacement procedures
20).
23
Advertisement
Table of Contents
