Before Requesting Service; Maintaining The Scale - A&D UC-352BLE-V Instruction Manual

If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Before Requesting Service

Problems
"E" is displayed
"E-0" is displayed
"Err" is displayed
"E-10" is displayed
"E-11" is displayed
is displayed
Nothing is displayed when the
setting switch is pressed
The measurement results
are greatly different from the
expected values

Maintaining the Scale

• If the scale becomes dirty, soak a cloth in water or mild detergent, wring the cloth
out thoroughly and then wipe the scale clean.
• After wiping away the dirt with the damp cloth, dry the scale using a soft, dry
cloth.
• Never use alcohol, benzene, thinner or other harsh chemicals to clean the scale.
• Remove the batteries from the battery compartment, when the scale is not going
to be used for a long time.
Causes/Corrective Action
Exceeds the maximum capacity (450 lb / 200 kg).
Exceeds the maximum capacity (450 lb / 200 kg).
Exceeds the maximum capacity (450 lb / 200 kg).
Communication error.
Remove and reinstall the batteries..
Remove and reinstall the batteries. Or replace all four batteries with new AAA
size alkaline batteries.
Place the scale on a solid level surface.
Remove any foreign objects that might be touching the bottom of the scale.
E-13