A&D UC-352BLE-V Instruction Manual page 11

Ensuring a good connection
• Ensure the space between this scale and the receiver is unobstructed. The
communication distance may be shortened due to the building construction or
other obstructions. In particular, communication may not be possible through
reinforced concrete walls, etc.
• Do not use the Bluetooth
equipment, near devices that emit electro-magnetic waves such as microwave
ovens, locations that have a large number of obstructions, or other poor
environments for radio waves. It may cause the connection to be frequently
interrupted, communication speeds to drop substantially, and errors to occur.
• When used near an IEEE802.11g/b/n wireless LAN device, the devices cause
mutual radio wave interference, and the communication speed may drop or
connection may be impossible. In this situation, turn the power of the device that
you are not using off, or change the location where it is used.
• If the scale does not communicate properly when used near a wireless device or
broadcast station, change the location where it is used.
• The communication distance between this scale and the receiver is approximately 32 feet or 10 meters. This distance
may become shorter due to the surrounding environment; therefore check that the distance is close enough for data to
be transmitted after the measurement.
Time Settings
This scale has a built-in clock. The date and time of measurement are included in
the measurement data. The clock is synced with the clock in the mobile device.
There is no need to set the clock on the scale.
connection near a wireless LAN or other wireless
®
Caution
E-11