Before Requesting Service; Maintaining The Scale - A&D UC-351PBT-Ci Instruction Manual

Before Requesting Service

Symptoms
E is displayed
E-0 is displayed
Err is displayed
E-10 is displayed
E-11 is displayed
H is displayed
is displayed
Nothing is displayed when
the setting switch is
pressed
The measurement
results are greatly
different from the
expected values.
Measurement doesn't start
when I step on the scale.

Maintaining the Scale

 If the scale becomes dirty, soak a cloth in water or mild detergent, wring the cloth out thoroughly and
then wipe the scale clean.
After wiping away the dirt with the damp cloth, dry the scale using a soft, dry cloth.
 Never use alcohol, benzene, thinner or other harsh chemicals to clean the scale.
 Remove the batteries from the battery compartment, when the scale is not going to be used for a long
time
Exceeds the maximum capacity (150 kg / 330 lb).
Exceeds the maximum capacity (150 kg / 330 lb).
Exceeds the maximum capacity (150 kg / 330 lb).
Pairing or unpairing has not completed correctly. Remove and reinstall
the batteries.
Exceeds the maximum capacity (150 kg / 330 lb).
Remove and reinstall the batteries. Or replace all four batteries with new
AA size alkaline batteries.
Place the scale on a solid level surface.
Remove any foreign objects that might be touching the bottom of the
scale.
Did you press the setting switch when stepping on the scale?
Place the scale on a hard floor, and press the setting switch before
measuring.
English 13
Corrective Action