Table of Contents
Advertisement
Measures for preparation
Fig. 4: Lifting points on the actuator
Note
We recommend regularly checking the actu-
ator and the prevailing storage conditions
during long storage times.
Storage instructions
− When the valve and actuator are al-
ready assembled, observe the storage
conditions for control valves. See associ-
ated valve documentation.
− Protect the actuator against external in-
fluences (e.g. impact).
16
Fig. 5: Lifting points on the control valve
(example)
− Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
− Protect the actuator against moisture and
dirt. Store it at a relative humidity of less
than 75 %. In damp spaces, prevent con-
densation. If necessary, use a drying
agent or heating.
− Make sure that the ambient air is free of
acids or other corrosive media.
− Observe permissible temperatures (see
section 3.3).
− Do not place any objects on the actuator.
EB 8314 EN
Advertisement
Table of Contents
