Device Pairing Procedure - Datavideo ITC-300 Instruction Manual

Device Pairing Procedure

The Pairing function is designed to configure channel assignment of the ITC-300
intercom system to the connected beltpacks. You will only be allowed to assign one
powered ON beltpack to one channel of the ITC-300 intercom system at a time. Power
of the rest of the beltpacks should be turned OFF.
Note: The pairs are system-beltpack only.
ITC-300 Base Unit
ITC-300SL Beltpack
The pairing procedure is outlined as follows:
Note: This pairing procedure also applies to paired devices.
External Tally LED Socket
An external tally LED (TD-2/3) can be connected to
the ITC-300SL via a GPI cable. This enables the tally
light to be positioned in a more visible place, such
as on top of the camera. When the channel is LIVE,
the LED will be RED, and when the channel is CUED,
the LED will be GREEN.
NOTE: The Tally LED on the ITC-300SL will continue
to operate as normal even after a TD-2/3 has been
connected.
Bi-Color Tally LED
Illuminates RED when the channel is LIVE and
GREEN when the channel is CUED.
16