Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Datavideo ITC-100SL
Summary of Contents for Datavideo ITC-100SL
- Page 1 INTERCOM BELT PACK ITC-100SL Instruction Manual w w w . d a t a v i d e o . c o m...
-
Page 2: Table Of Contents
Further advice on the content of this manual or on the product can be obtained by contacting your local Datavideo Office or... -
Page 3: Fcc Compliance Statement
This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. - Page 4 If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord rating. 10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not exceed 15 amperes.
-
Page 5: Warranty
Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are covered for 1 year. The three-year warranty must be registered on Datavideo's official website or with your local Datavideo office or one of its authorized distributors within 30 days of purchase. -
Page 6: Disposal
Disposal For EU Customers only - WEEE Marking This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. -
Page 7: Itc-100Sl Slave Unit
Bi-Color Tally LED RED indicates LIVE Green indicates CUED XLR Connection Connects the ITC-100SL to the ITC-100 Base Station. Power, tally and bi-directional audio are all carried through the same cable. Call Button Sends a paging message to the ITC-100 Base Station. - Page 8 Adjusts the volume of the headphones. Mic / Headphone Socket The ITC-100SL has both a 3.5mm and 2.5mm Mic / Headset socket. A standard 3.5mm Mic / Headset can be used, or a Motorola type 2.5mm Mic / headset could be...
- Page 9 External Tally LED Socket An external tally display (TD-2) can be connected to the ITC-100SL. This enables the tally light to be positioned in a more convenient place, such as on top of the camera. When the channel is LIVE the LED will be RED, and when the channel is CUED the LED will be AMBER.
-
Page 10: Specification
Specification INPUT 5 Pin XLR Connector MIC / 3.5mm Stereo Jack Socket for combination HEADSET Headphone / Microphone SOCKET Headset Impedance 8~600 ohms 100mW(min) Microphone Level -67dB 2.5mm Stereo Jack Socket, for Motorola Mobile Phone type headset / microphone FREQUENCY 550-3.6KHz, <... -
Page 11: Service And Support
Service & Support It is our goal to make owning and using Datavideo products a satisfying experience. Our support staff is available to assist you to set up and operate your system. Contact your local office for specific support requests.
Need help?
Do you have a question about the ITC-100SL and is the answer not in the manual?
Questions and answers