Datavideo ITC-300 Instruction Manual page 13

Note: The product package contains a base unit and four beltpacks which are
already paired before shipment. You are allowed to connect additional beltpacks
but they must be paired with the base unit prior use.
Ethernet Port
For FW Upgrade.
Tally Inputs A / B
Tally Inputs A & B provide direct connection to
the Datavideo switcher. They supply bi-color
tally information to the ITC-300SL; RED
indicates Live and GREEN indicates Cued.
Tally Input A carries bicolor tally information of
Channels 1 ~ 4 and Tally Input B carries bicolor
tally information of Channels 5 ~ 8.
Audio IN/OUT
Audio IN/OUT
Connects an external audio source to AUDIO IN
and the AUDIO OUT outputs the internal audio.
See the section on
connection methods.
DC Power IN
DC in socket connects the supplied 12V / 36W
PSU.
Ground Terminal
When connecting this unit to any other
component, make sure that it is properly
grounded by connecting this terminal to an
appropriate point. When connecting, use the
socket and be sure to use wire with a cross-
sectional area of at least 1.0 mm².
13
AUDIO IN mode for