7. This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company.
Datavideo warrants that the equipment it manufactures shall be free from defects in material and workmanship for a period of 12 months from the date of product purchased. If equipment fails due to such defects, Datavideo will, at its option, repair or provide a replacement for the defective part or product.
Page 4
Datavideo is proud to introduce the ITC-200B, the Expandable Intercom Base Unit and ITC-200E, the Expansion Unit for supporting the base unit that allow director to communicate up to 16 scattering cameramen on the location.
Front Panel CASCADE OUT The ITC-200E CASCADE OUT, Let you connect ITC-200B CASCADE IN, after connect ITC-200B & ITC-200E, the ITC-200B can control ITC-200B & ITC-200E at same time. DC Power Input 12V Connect the 12V power supply. The power supply plug has a screw in...
D. Tally Inputs C & D Tally Inputs C & D are configured for direct connection to the Datavideo RMC-140, RMC-90 or SE-500. They supply bi-color tally information to the ITC-100SL; RED indicates Live and AMBER indicates Cued. Tally C will...
Specification POWER TALLY 2 x 15 Pin Sub female Sockets for Tally A and Tally B INPUTS / OUTPUTS INTERCOM / TALLY OUTPUT CH1-8 ,5 PIN XLR Female connector CASCADE OUT 550-3.6KHz, < +/-3dB FREQUENCY RESPONSE < 3% > 50dB Up to 200m between Base Station and Slave OPERATING RANGE 5 ~ 45°C...
It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setting up and operating your system. Please refer to our web site www.datavideo-tek.com for answers to common questions, support requests or contact your local office below.