Table of Contents
Advertisement
ALL Button
Opens communication with all channels.
Note: All channels will hear communication from the
operator by pressing the ITC-100SL Belt Pack's TALK
button.
HOLD Button
Press the HOLD button to
check available online
beltpacks
and
select channels for group
communication.
Channel Buttons 1 – 8
Opens communication with individual channels. More
than 1 channel can be active at any given time, and
active channels are illuminated red.
All active channels will hear communication from the
operator. The buttons will also indicate if any channel
is paging, the paging channel will flash in green until
the page is answered.
These channel buttons can also be used to gain access
to certain built-in features on the ITC-300. See the
section on
Function Keys
for details.
Mute Button
Mutes all communications from the base station.
NOTE: If any channel user presses the beltpack's CALL
button, that particular channel button on the base
unit's front panel will start flashing.
SHIFT Button
Press the SHIFT button to adjust the microphone's
audio level, the beltpack's volume in the PARTY mode
and enable/disable AUDIO IN mode.
11
Hide quick links:
Advertisement
Table of Contents
