Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Datavideo ITC-200E
Summary of Contents for Datavideo ITC-200E
- Page 1 INTERCOM EXPANSION UNIT ITC-200E Instruction manual...
-
Page 2: Table Of Contents
Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions or incorrect information. -
Page 3: Fcc Compliance Statement
AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. 8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, or otherwise stressed. -
Page 4: Warranty
The product warranty period begins on the purchase date. If the purchase date is unknown, • the product warranty period begins on the thirtieth day after shipment from a Datavideo office. Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered •... -
Page 5: Three Year Warranty
State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are covered for 1 year. The three-year warranty must be registered on Datavideo's official website or with your local • Datavideo office or one of its authorized distributors within 30 days of purchase. -
Page 6: Introduction
The ITC-200E provides an additional 8 channels to the Datavideo ITC-100 tally/talkback system. This ITC-100/ITC-200E combination effectively gives you a 15 channel system. The ITC-100/ITC-200E combination enables the operator to talk to the channels 1-7 separately and the other 8 as a group or to all 15 channels at once. -
Page 7: Connections And Controls
Front Panel CASCADE OUT Connect the ITC-200E CASCADE OUT to CASCADE IN of the ITC-100 to connect the ITC-200E and the ITC-100 in a cascade arrangement, which allows you to control the two machines at the same time. DC Power Input 12V DC in socket connects the supplied 12V PSU. -
Page 8: Dimensions
Ground Terminal When connecting this unit to any other component, make sure that it is properly grounded by connecting this terminal to an appropriate point. When connecting, use the socket and be sure to use wire with a cross-sectional area of at least 1.0 mm Dimensions Specifications POWER... -
Page 9: Service & Support
Service & Support It is our goal to make owning and using Datavideo products a satisfying experience. Our support staff is available to assist you to set up and operate your system. Contact your local office for specific support requests. Plus, DATAVIDEO WORLDWIDE OFFICES please visit www.datavideo.com to access our FAQ section.
Need help?
Do you have a question about the ITC-200E and is the answer not in the manual?
Questions and answers