Ordering Information; Specifications; Table 2 Ordering Information; Table 3 General Specifications - Federal Signal Corporation Modulator MOD Series Description, Specifications, Installation, And Service Manual

Ordering Information

Contact our Federal Signal sales engineers to design a system that meets your specific
requirements. Specify speaker array model number. Each speaker array model must be
ordered with a specific corresponding UV and amplifier.

Table 2 Ordering Information

Speaker
MOD1004B
MOD2008B
MOD3012B
MOD4016B
MOD5020B
MOD6024B
MOD6032B
MOD8032B
Controllers available in radio, IP, and landline.
1
Add the letter C to the Modulator model name for Steel/Concrete pole mount model.
2
NOTE: For the standard cable length supplied with the siren see "Table 13 Number
of Wires and Cable Length per Module" on page 19. Extension cable is also
available in 10-foot increments. Mounting the UV controller farther than 100 feet is not
recommended. (Farther mounting may decrease power output.)

Specifications

Table 3 General Specifications

Color
Paint Type
Modular Horn Type
Frequency Response
Horizontal Coverage
Bottom (non-active) Module* Dimensions
Input Voltage
* The bottom module of the siren is a passive device that does not contain any drivers. Its
functional use is to complete the horn formed by the bottom and the first active module.
The bottom module also provides a mounting solution for the optional side lights.
The following tables list each MOD model number with its specifications. Each speaker
array model must be ordered with a specific corresponding UV and Amplifier.
Wind load calculations are for speaker array only.
Description, Specifications, Installation, and Service Manual
Controller
1
UV + 1 UV400
2
UV + 2 UV400
2
UV + 3 UV400
2
UV + 4 UV400
2
UV + 5 UV400
2
UV + 6 UV400
2
UV + 8 UV400
2
UV + 8 UV400
2
Weather Guard White III
TGIC Polyester Powder Coat
Hyperbolic Flare
200-2000 Hz
360 Degrees
13-1/2 x 35 inches Diameter
66 V min., 400 W max.
RMS
Specifications
9