Installing The Side Light Kit; Figure 9 Side Light; Figure 10 Side Light Wiring; Table 15 Side Light Kit (Model Mod-Qf-Kit) - Federal Signal Corporation Modulator MOD Series Description, Specifications, Installation, And Service Manual

Installation

Installing the Side Light Kit

The Side Light Kit is installed on the bottom (inactive) module. See Figures 9 and 10.
To install the Side Light Kit:
1. Replace the standard driver access doors with the side light mounting doors.
2. Wire the four side lights to the two spare wires from the wire harness within the

Figure 9 Side Light

Table 15 Side Light Kit (Model MOD-QF-KIT)

Item No.
100
101
102
103
104

Figure 10 Side Light Wiring

22
module. Connect the wires (four red and one pink positive) together with a wire nut.
Connect the black wires (five black negative) together with a wire nut. Zip tie the
wires to the pole.
Qty. Description
4 Door, Driver Access, QF MNT
4 QuadraFlare LED, 24 V, Red
16 Screw, Machine, 6-32, Phillips, Stainless Steel
16 Nut, Hex, Ext KEPS, 6-32
4 QL64, Radiused Wedge, Gasket
Modulator High-Powered Omni Speaker (MOD Series)
Part Number
857000018A-01
QL64-24RR-ANS
7000A427-28
7058A046
801201900A