Starting Up; Before Starting - Bosch C 70 Manual

11.1 Before starting

11.1.1 Setting up a new RaceCon Project
Bosch Motorsport

11 Starting up

Install the software required C 70 operation. It is developed for Windows system software.
Following software versions are used in this manual:
– C 70 setup, configuration and calibration: RaceCon
– Measurement data analysis: WinDarab V7
Set up the 100 Mbit Ethernet connection to the C 70.
– The Ethernet port has 'cable auto crossover' functionality
The following screenshot shows an overview of the RaceCon Main Screen with its areas.
All (sub-) windows are resizable and dockable. You can find them under the 'Windows'
tab.
Main Area
Project
Tree
Data Area
1. Start the RaceCon software.
Data Logger C 70 Manual
Starting up | 11
Toolbox
Message Area
51 / 112