Bosch C 70 Manual page 38

7 | Error Memory
7.1.2 Clearing the error memory
38 / 112
The memory is situated inside the device and is non‐volatile. As a consequence, an error
which has occurred and has not been cleared by the user will remain in the error memory
even after a power cycle. The error state will then reflect if the error is still active or not.
An error is deleted from the list when
– the user actively clears the error memory
– the user updates the firmware
The error memory is not cleared by a configuration download and is not cleared by a
power cycle.
There are two ways of clearing the error memory, both are shown in the following illustra-
tion:
Data Logger C 70 Manual Bosch Motorsport