Table of Contents
Advertisement
5 | Analog and Frequency Inputs
22 / 112
5.
Click 'Next'.
6.
Define the settings for the sensor.
7.
Click 'Finish' when done.
8.
Enter the channel name and description.
9.
Click 'OK' when done.
The channel is inserted into the C 70 Project Tree.
Channel is linked
to REV01
Available measurements for channel:
Data Logger C 70 Manual
Number of teeth on the
pulse wheel
Circumference of wheel
for speed calculation
Choose data type of the
measurement variable
Enter name to automatically
create a new measurement sheet
Input pin
Number of
Wheel
has hall
teeth
circumference
interface
Bosch Motorsport
Advertisement
Table of Contents
