Table of Contents
Advertisement
Bosch Motorsport
NOTICE
Refer to the WinDarab V7 manual for instructions on how to use the
'Data Logger Import' dialog and for more detailed descriptions and
instructions.
9.
Choose the device and the IP address for the device.
10. Click 'Apply changes' when done.
11. Connect the C 70 network cable.
12. Click on the 'Current Import' tab.
13. Click on 'Import' in the lower right corner.
If the 'Import all on connect' box is checked, the data transmission from the C 70
starts automatically. Measurement files are stored automatically in the folder defined
under 'Settings'.
14. Click on 'Close' when the transmission has finished.
15. Click on the Start button and choose 'Open measurement file'.
16. Select the measurement files from the storage folder.
17. Click on 'Open'.
18. Click on 'New Desktop' to open a new measurement data window.
Data Logger C 70 Manual
Starting up | 11
Choose your DDU
from dropdown list
59 / 112
Advertisement
Table of Contents
