Function Programming Menu - Setting For The Functions Available On The Dome; Preset Submenu Of Function Programming Menu - urmet domus Easy Dome IV 1092 Series Installation And User Manual

4.5.5 FUNCTION PROGRAMMING MENU – SETTING FOR THE FUNCTIONS AVAILABLE ON THE DOME.
From the first level menu, choose <FUNCTION PROGRAMMING> to select the functions available on the dome.
4.5.5.1

PRESET submenu of FUNCTION PROGRAMMING menu

Option
NUMBER
SET PRESET
CALL PRESET
DELETE PRESET
NAME
NAME DISPLAY
DS1092-121
FUNCTION PROGRAMMING
1 Preset
2 VectorScan
3 Pattern
4 Sector Setup
5 Mask Zone
6 Mask Color
7 Alarm Programming
8 Temperature Prog
9 Motion
1 Number
2 Set Preset
3 Call Preset
4 Delete Preset
5 Name
6 Name Display
Value
1/50÷64/77÷102/170
÷187/255
ON / OFF
PAGE 2
PRESET
1
______________
OFF
Explanation
This option is used to select a presetting for entering a descriptive
label. This operation is allowed for up to 200 presettings.
Press the IRIS+ button and use the joystick to set the number of
the presetting to the stored.
Press open to confirm.
This option allows to store the preset. It is needed to view the
image to be associated to the preset and press IRIS-. The storage
is confirmed by the message STORED.
This operation allows to recall a stored preset. .
This operation allows to delete a stored preset. After selecting the
preset to be deleted, press IRIS+ and confirm again by pressing
again the button. Otherwise it is possible to exit by pressing IRIS-.
This operation allows to give a name to the stored presets. By
pressing twice IRIS+, on the display appears the screen where it
is possible to edit the preset name.
If selected in ON, this operation allows to see on the monitor the
name previously stored and associated to the displayed preset.
88