Function Programming Menu - Setting For The Functions Available On The Dome - urmet domus Easy Dome 1092/679 User And Installation Manual

5.5.6 FUNCTION PROGRAMMING MENU – SETTING FOR THE FUNCTIONS AVAILABLE ON THE DOME
From the first level menu, choose <FUNCTION PROGRAMMING> to select the functions available on the dome.
5.5.6.1 PRESET submenu of FUNCTION PROGRAMMING menu
Option
NUMBER
SET PRESET
CALL PRESET
DELETE PRESET
NAME
NAME DISPLAY
RETURN
DS1092-229
1 Preset
2 VectorScan
3 Pattern
4 Sector Setup
5 Mask Zone Setup
6 Motion
7 Auto Scan Setup
8 Pan Scan Setup
9 Alarm Programming
10 Return
1 Number
2 Set Preset
3 Call Preset
4 Delete Preset
5 Name
6 Name Display
7 Return
Value
1÷64
ON / OFF
FUNCTION PROGRAM
NA
PRESET
1
______________
OFF
Explanation
This option is used to select a presetting for entering a descriptive
label. This operation is allowed for up to 64 presettings.
Press the IRIS+ button and use the joystick to set the number of
the presetting to the stored.
Press open to confirm.
This option allows to store the preset. It is needed to view the
image to be associated to the preset and press IRIS-. The storage
is confirmed by the message STORED.
This operation allows to recall a stored preset. .
This operation allows to delete a stored preset. After selecting the
preset to be deleted, press IRIS+ and confirm again by pressing
again the button. Otherwise it is possible to exit by pressing IRIS-.
This operation allows to give a name to the stored presets. By
pressing twice IRIS+, on the display appears the screen where it
is possible to edit the preset name.
If selected in ON, this operation allows to see on the monitor the
name previously stored and associated to the displayed preset.
Closes OSD menu
22