Auto Tracking Setup Submenu Relating To The Motion Submenu (Available Only On Ref.1092/674 And 1092/675) - urmet domus Easy Dome IV 1092 Series Installation And User Manual

END POSITION
DIRECTION
OPERATION
4.5.9 AUTO TRACKING SETUP SUBMENU relating to the MOTION submenu (Available only on Ref.1092/674
and 1092/675)
Functioning
The Auto-Tracking function automatically tracks moving objects, detecting changes in the grey scale (brightness) of the
scene.
Detection is based on the principles of a motion detector.
Opzione
TARGET LOST SETUP
BOUNDARY LIMIT
SENSITIVITY
SENSITIVITY
ZOOM SETTING
TRACKING SPEED
AUTO TRACKING
DS1092-121
0,0 ÷ 359,9 ÷ 0,0 ÷ 90,0
LEFT/RIGHT
ON/OFF
1 Target Lost Setup
2 Boundary Limit
3 Sensitivity
4 Target Size
5 Zoom Setting
6 Tracking Speed
7 Aut Tracking
Valore
HIGH/MEDIUM/LOW
HIGH/MEDIUM/LOW
OFF, 1 ÷ 18
AUTO, 1 ÷ 63
ON/OFF
This option allows to store the PAN/TILT zone final
coordinates. By pressing IRIS+ and selecting with the arrow
buttons the end position frame to be stored for the zone, it is
possible to see on the monitor also the coordinates of the
displayed frame. Press again IRIS+ to confirm the storing of
the zone end position.
This option allows to select the motion direction of the dome
(Left, Right).
If set to ON, this option allows to activate the function.
AUTO TRACKING SETUP
MEDIUM
MEDIUM
ON
AUTO
AUTO
Spiegazione
This submenu defines the actions that the Dome must carry out
after losing the object tracked (see below)
This submenu permits definition of the zone in which the Dome
must carry out tracking
This option determines sensibility for activation of autotracking.
Sensitivity measures the change in brightness of a specific point of
the scene in the unit of time.
This option determines sensibility for activation of autotracking.
Sensitivity measures the change in brightness of a specific point of
the scene in the unit of time.
This option determines the maximum value of the Zoom that the
Dome can use when tracking an object
This option defines the speed of movement of the camera; if the
AUTO value is selected, the Dome "adapts" automatically to the
movement of the target. In MANUAL, a forecast speed of the
object to be tracked can be set (1 slow; 63 fast).
This option enables/disables the Tracking function
98