Enter Into The Config Mode; Customer Settings; Manual Capturing; View Images Or Videos - Suntek HC-300A User Manual

3.4 Enter into the Config Mode

Slide the power switch to the Config position to enter into the Config mode. There are
some functions in Config mode: Custom settings, manual capture, preview.

3.4.1 Customer Settings

Press the MENU switch to enter into menu setting. The camera can be taken over control
to manually customize the camera settings which display on the camera or external TV
monitor. The detailed operations will be described in "Advanced Operations" chapter.

3.4.2 Manual Capturing

You can press OK to manually capture photos or recording video.

3.4.3 View Images or Videos

There are two ways to view the captured images or videos:
1. LCD screen on camera.
2. TV monitors which connects to camera with TV cable.
Turn right the select switch to view images, the image will be shown in the LCD screen
on camera or TV monitor. Press UP to view the previous image and press DOWN for the
next. The detailed operations like deleting images or videos will be described in
"Advanced Operations" chapter.

3.5 Power Off

Slide the power switch to OFF position to power off the camera. Please note that even in
the OFF mode, the camera still consumes certain power at µA level.
Therefore, please remove the battery if the camera will not be used for a long time.
From the basic operations of the camera in previous chapter, we know that the camera
has three basic operation modes:
1. OFF mode: Power switch is at OFF position (Right).
2. ON mode: Power switch is at ON position (Left).
3. Config mode: Power switch is at Config position (Middle).
In the above three modes, the OFF mode is the specified safe mode when replacing the
SD-card or batteries and transporting the camera.
This chapter explains the advanced operations for customizing the camera settings. The
settings can only be customized in CONFIG mode and the remote control is needed.

4.1 Settings Menu

To view the camera settings menu, press MENU in the CONFIG mode (called settings
menu in this chapter).The settings menu will be shown on the LCD on camera or the
external TV monitor.

4.Advanced Operations

ENG-7