Insert The Sd-Card; Enter Into The Test Mode; User Settings; Manual Capturing - Suntek HC-300A User Manual

2.2 Insert the SD card
Insert SD-card into the card slot.

2.3 Enter into the TEST Mode

Turn the power switch to the TEST position to enter into the TEST mode. There are
some functions in TEST mode: user settings, manually capture, preview.

2.3.1 User Settings

Press the MENU button. The camera can be set (mode, picture resolution, video
resolution& length,etc) The detailed operations will be described in following chapter.

2.3.2 Manual Capturing

press OK to manually capture photos or record video.

2.3.3 View Images or Videos

There are two ways to view the captured images or videos:
1. LCD screen on camera
2. TV monitors which connects to camera with TV cable
press right arrow to view captured files, the latest image will be shown in the LCD
screen or TV monitor. Press UP to view the last and press DOWN for the next. The
detailed operations like deleting images or videos will be described in "Advanced
Operations" chapter.

2.4 Power on and Enter into the ON Mode

Before switching on, please pay attention to the following items:
1. Don't face light source directly. These may cause false triggers
2. The height from ground for placing should be 1-2 meters. For example for deer
height is good size appropriately.
After switching on the camera, the red light will blink for about 10s. The 10s is a
buffering time before automatic capturing, e.g. for closing and locking the bottom cover,
fixing the camera on a tree and walking away.

2.5 Power Off

Slide the power switch to OFF position to turn off the camera.
Therefore, please remove the battery if the camera will not be used for a long time.

3. Advanced Operations

This chapter explains that user settings can only be done in TEST mode and the
remote control is needed.

3.1 Settings Menu

Press MENU when camera in the TEST mode.The settings menu will be shown on
4