Carrier AERO 39MN Installation, Start-Up And Service Instructions Manual page 72

a39-4296
3. Install the self adhesive seal strip (2.00 in. wide x
0.375 in. thick neoprene gasket) to the top surface of the
roof curb, making sure that the notch between the CCH
roof curb and the unit roof curb is completely covered
with gasket. See Fig. 43.
SHIPPING
BRACKETS
(4 PLACES)
Fig. 42 — Remove Shipping Brackets
Fig. 43 — Installing Seal Strip
COIL CONNECTION HOUSING
LEGEND
CCH — Coil Connection Housing
NOTE: Ensure that the surface is clean before installing any
gasket.
4. Apply the provided seal strip (1.25 in. wide x 0.125 in.
thick neoprene gasket) to both side flashings as shown
in Fig. 44.
71
a39-4235